Maintenance A Tech 3rd Shift Sun-Thur 11pm-7am

Profile

Primary Responsibilities of the Job:

Exhibit proven troubleshooting skills in all aspects of distribution center maintenance including PLC Control Logic, electrical, mechanical, and analytical areas of the business. Use electronic/electrical knowledge to troubleshoot system problems. Lead safe work practice behaviors by demonstrating safety in implementation of tasks and understanding safety considerations related to equipment installations and troubleshooting. Troubleshoot equipment-related problems and process performance related issues in order to determine the root cause(s) of a particular request or incident. Use systematic troubleshooting methods to determine the key root cause. Apply good judgment to choosing solutions.   Install electrical conduit, wiring, switching devices, controls, fixtures, motors, outlets, enclosures, and other such equipment in order to increase capacity, repair breakdowns, or improve efficiency. Analyze and repair electrical and operational problems on assigned equipment (i.e.                             conveyor/sortation, building/facility, fire/safety) and plans and takes corrective action. Assist in testing and calibrating electrical, pneumatic, and HVAC controls under operating conditions with or without assistance from specialized contractor(s). Install electrical conduit, wiring, control panels, data lines, switching devices, PLC’s, controls, fixtures, motors, outlets, and other such equipment in accordance with applicable codes such as NEC, UL, and NFPA as necessary. Demonstrate leadership in this capacity through work area and project cleanliness, neatness, and standardization of installation behaviors. Perform diagnostic tests, maintain, and evaluate equipment performance using instruments such as voltmeters, pyrometers, pressure gauges, tachometers, light meters, thermal imagers, potentiometers, multi-meters, and other instrumentation devices. Test, calibrate, and repair pneumatic controls, HVAC controls, pumps, fans, valves, PLC’s electronic eyes, photo-eyes/photocells, emitters/receivers, motors, and motor starters/inverters, relays, etc. in order to return equipment to operational status. Conduct routine preventative maintenance inspection of assigned equipment, report findings and take corrective actions if possible. Record findings in CMMS. Document and communicate recurring equipment malfunctions, reliability concerns, and lead the effort to implement corrective action recommendations. Use computerized maintenance management system (CMMS) to seek out similar issues for help with resolution and/or to build justification for replacement equipment. Assist or coach lower-level technicians with their CMMS proficiency. Develop and present training and communication sessions for the department related to new, modified, or complex equipment operations. Operate and troubleshoot label application equipment as required to maintain a documented record of label quality from either desktop, or process-line printing devices. Assist in routine preventative maintenance inspection of assigned equipment including lubrication of both stationary and moving equipment with oils, greases and other lubricants. Perform other duties as assigned.

Contacts:

            Internal:   Facility Engineer, Maintenance Manager, Supervision, and Operations Managers, IT personnel

            External:  Contact with outside services, contractors, inspectors, and other technical consultants

Decision Making:

1.         Determine best methods, procedures for maintenance repairs.

2.         Make troubleshooting/repair recommendations to maintenance supervisor

Resourcefulness/Creativity: Associate should be effective in solving non-recurring problems.

Environment:   

1.         Must stay abreast of changing technology and work in a fast-paced environment

2.         Must be able to crawl, bend, lift up to 50 lbs., climb, and work at up to 50 ft. heights

3.         Must be able to distinguish different wire colors

4.         Must be able to stand most or all of shift in a wide range of temperatures

Qualifications & Experience: 

Experience:           Must have 5-7 years mechanical maintenance, carpentry, plumbing, conveyors, and sortation experience in a distribution environment. A minimum of two (2) years proven, demonstrated and verifiable electrical / electronics experience is desired.

• Understand PLC programming and controls in an automated environment
• Six (6) weeks of Weekend Shift experience preferred
• Exposure to paints, coatings, and adhesives applications
• Root Cause Analysis or other systematic problem solving exposure
• Familiar with gearboxes and electric motors, v-belts and pulleys
• Exposure to mathematics applied to industry
• Familiar with sprockets and chains used as power transmission
• Understand, confidently use, and maintain shop tools
• Understand principles of generators and power generation equipment
• Familiar with metal fabrication tools, cutting & welding, pumps and compressors, HVAC, and fire response equipment
• Understand packaging and labeling equipment and their implementation
• Ability to read and understand blueprints and schematics related to processing equipment
• Familiar with industrial lighting types and applications

          Education:           Must score a minimum of 75 percentile on the Bennet’s Mechanical Aptitude test. Requires High School Diploma or GED. Technical school or technical training preferred.

                                      Willingness to attend and complete conveyor training classes off site Analytical skills including meters and gauges

              Skills:              Must possess troubleshooting skills, good communication, mechanical aptitude ability to operate various equipment, ability to use hand tools.

,title:Maintenance A Tech 3rd Shift (Sun-Thur 11pm-7am),datePosted:2021-03-08T00:00:00.000 0000,@context:http://schema.org,occupationalCategory:Logistics,educationRequirements:Requires High School Diploma or GED. ,experienceRequirements:Must have 5-7 years mechanical maintenance, carpentry, plumbing, conveyors, and sortation experience in a distribution environment. A minimum of two (2) years proven, demonstrated and verifiable electrical / electronics experience is desired. ,responsibilities:Exhibit proven troubleshooting skills in all aspects of distribution center maintenance including PLC Control Logic, electrical, mechanical, and analytical areas of the business. Use electronic/electrical knowledge to troubleshoot system problems. Lead safe work practice behaviors by demonstrating safety in implementation of tasks and understanding safety considerations related to equipment installations and troubleshooting. Troubleshoot equipment-related problems and process performance related issues in order to determine the root cause(s) of a particular request or incident. Use systematic troubleshooting methods to determine the key root cause. Apply good judgment to choosing solutions. Install electrical conduit, wiring, switching devices, controls, fixtures, motors, outlets, enclosures, and other such equipment in order to increase capacity, repair breakdowns, or improve efficiency. Analyze and repair electrical and operational problems on assigned equipment (i.e. conveyor/sortation, building/facility, fire/safety) and plans and takes corrective action. Assist in testing and calibrating electrical, pneumatic, and HVAC controls under operating conditions with or without assistance from specialized contractor(s). Install electrical conduit, wiring, control panels, data lines, switching devices, PLC’s, controls, fixtures, motors, outlets, and other such equipment in accordance with applicable codes such as NEC, UL, and NFPA as necessary. Demonstrate leadership in this capacity through work area and project cleanliness, neatness, and standardization of installation behaviors. Perform diagnostic tests, maintain, and evaluate equipment performance using instruments such as voltmeters, pyrometers, pressure gauges, tachometers, light meters, thermal imagers, potentiometers, multi-meters, and other instrumentation devices. Test, calibrate, and repair pneumatic controls, HVAC controls, pumps, fans, valves, PLC’s electronic eyes, photo-eyes/photocells, emitters/receivers, motors, and motor starters/inverters, relays, etc. in order to return equipment to operational status. Conduct routine preventative maintenance inspection of assigned equipment, report findings and take corrective actions if possible. Record findings in CMMS. Document and communicate recurring equipment malfunctions, reliability concerns, and lead the effort to implement corrective action recommendations. Use computerized maintenance management system (CMMS) to seek out similar issues for help with resolution and/or to build justification for replacement equipment. Assist or coach lower-level technicians with their CMMS proficiency. Develop and present training and communication sessions for the department related to new, modified, or complex equipment operations. Operate and troubleshoot label application equipment as required to maintain a documented record of label quality from either desktop, or process-line printing devices. Assist in routine preventative maintenance inspection of assigned equipment including lubrication of both stationary and moving equipment with oils, greases and other lubricants. Perform other duties as assigned. Determine best methods, procedures for maintenance repairs. Make troubleshooting/repair recommendations to maintenance supervisor. Understand PLC programming and controls in an automated environment. Familiar with sprockets and chains used as power transmission. Understand, confidently use, and maintain shop tools. Understand principles of generators and power generation equipment. Understand packaging and labeling equipment and their implementation. Willingness to attend and complete conveyor training classes off site Analytical skills including meters and gauges. ,skills:hvac, plc programming, blueprints, work in a fast-paced environment, problem solving, communication, root cause analysis, metal fabrication tools, hand tools, shop tools, mathematics, resourcefulness, preventative maintenance, repairs, power generation equipment, troubleshooting, leadership, mechanical maintenance, training, maintenance management, good judgment, testing, control logic, industrial lighting, carpentry, cmms, good communication, generators, power transmission, analytical, metal fabrication, operational, hvac controls, lubrication, mechanical aptitude, repair, pneumatic controls, decision making, electric motors, welding, compressors, wiring, Resident Storage Management Consultant, Module Administrator, Infrastructure Support Team Lead, Oracle Administrator, Junior System Administrator, Windows Administrator, Linux Administrator Engineer, Junior Systems Administrator, Assistant System Administrator, Facility Management Engineer}Maintenance A Tech 3rd Shift (Sun-Thur 11pm-7am) in McDonough, Georgia, United States of America | Logistics at PVH

Company info

PVH Corp
Website : http://www.pvh.com/